Catalog
+38 (097) 754 44 88 retail store + service
+38 (099) 423 29 21 wholesale department
Hide
EN UA RU
retail store + service +38 (097) 754 44 88
wholesale department +38 (099) 423 29 21
Catalog
Home Surface pumps Self-priming “JET” pump BCS-0.5-30

Self-priming “JET” pump BCS-0.5-30

Made in Ukraine
Select a pump
Technologist consultation
Name
Phone
Task
Description Self-priming “JET” pump BCS-0.5-30

OPERATING RANGE

  • Optimum flow rate – 0.5 l/s (1.8 m3/h), maximum flow rate – 1.0 l/s (3.6 m3/h);
  • Actual suction height with 1-inch diameter piping not exceeding 7 meters;
  • Nominal head 30 meters;
  • Maximum head 50 meters.

OBJECTIVITY

Surface centrifugal self-priming electric pumps "Vodoley" series BCS are designed for water supply from open reservoirs, wells, as well as ponds for irrigation of household plots.

GENERAL OPERATING CONDITIONS

  • during operation air should not get into the pumping part;
  • limit lower and upper values of ambient temperature from 1ºC to 45ºC;
  • the temperature of pumped water must not exceed 350C;
  • water must not contain sand and other visible mechanical impurities;
  • pumping of aggressive liquids is prohibited;
  • mineralization of water should not exceed 1500 g/m3;
  • the flow rate of the well must exceed the pump capacity;
  • the pumping part must be filled with water before the first start-up;
  • the minimum capacity of the electric pump should be not less than 0.36 m3/h;
  • altitude above sea level not more than 1000 m.

CONSTRUCTION

Surface centrifugal self-priming electric pump "Vodoley" series BCS is a monoblock, namely an asynchronous single-phase electric motor with a connected single-stage pumping part. The pump is equipped with a single-phase asynchronous electric motor designed for operating voltage 230 V, frequency of the network 50 Hz.

According to the degree of protection against electric shock the electric pump belongs to class I according to GOST IEC 60335-2-41. By degree of protection against moisture the electric pump belongs to splash-proof devices (IPX4) according to GOST IEC 60335-2-41.

Surface centrifugal self-priming electric pump BCS-0.5-30 U1,1 is equipped with a cable with an electric plug 2 meters long and is available in horizontal version.

Warranty period for all products: 24 months from the date of sale.

Important! The suction pipe must have absolute air sealing and withstand vacuum without deformation.

Delivery and payment

To order an electric pump/electric motor on our website, you need to complete several steps:

  • select the model of electric pump/electric motor you are interested in in the catalogue;
  • by clicking on the active window, order an electric pump/electric motor, fill out the order window;
  • within 24 hours, taking into account the store’s work schedule, a manager will call you back on the mobile phone you specified to clarify the details of the order;
  • after which the amount corresponding to the ordered products must be deposited into the current account IBAN UA063515330000026002052214656 MFO 351533 Bank KhGRU PJSC CB Privatbank (commission at the expense of the payer). In the payment purpose field, you must indicate: name of the goods for payment, surname, first name of the Payer (for example: Ivanov I. payment for electric pump BСPE 0.5-63 / electric motor AI1E71A2L);
  • after payment and crediting of funds to the bank account of Promelektro-Kharkov LLC, the goods will be sent by the Novaya Poshta transportation service to the city and department specified by the Buyer.

IIf you have any questions about payment for goods and their delivery, please contact the store at the following phone numbers: 097 754 44 88, 095 754 44 88, or write to us on the feedback form or vodoley.ukraine@gmail.com

Thank you for choosing products manufactured by Promelectro-Kharkiv LLC.

Order